Custom made PCB with CC430 works! Blinking wonderfully :-)

I’m working on a little project using the CC430 microcontroller (specifically a CC430F6137) from Texas Instruments.. well, I was a bit skeptical about this project because the micro is pretty hard to solder, (it’s a QFN with 64 pins).. however, some time ago I soldered it fine and only today I finally had time to run some code on …

Custom made PCB with CC430 works! Blinking wonderfully 🙂 Read More »

FreeIMU Magnetometer and Accelerometer Calibration GUI: alpha version out

I’m happy to finally publish a first working version of the FreeIMU Magnetometer and Accelerometer Calibration GUI. Currently, it should allow you to visually calibrate your accelerometer and magnetometer after you connected your IMU to a microcontroller running the FreeIMU_serial example in the FreeIMU library. NOTE: You have to use the FreeIMU_library available on the repository, not the …

FreeIMU Magnetometer and Accelerometer Calibration GUI: alpha version out Read More »

Sharp Memory LCD with Arduino

Simple tests on the LS013B4DN04 (3.3v version of the 96×96 Sharp Memory LCD with Flat Cable connection) using a custom made breakout board I designed etched by my friend Franco Magni. This uses this Arduino Library: http://code.google.com/p/arduino-sharp-memory-lcd-gfx-library/

Scroll to Top